5/5 - (54 votes)

Looking for the best Shock absorbor in USA?  You can simply find them from the local manufacturers and distributors.

We have done our due diligence and listed for you 10 reliable Shock absorbor manufacturers and suppliers in USA. Next time you need to buy the Shock absorbor, simply contact them and  they will sort you out.

Here is a list of the 10 Shock absorbor manufacturers and suppliers in USA.

 

1.  Suspension Spring Specialists USA

Address: 803 W Water St, Bremen, IN 46506, United States

Tel: +15745462870

Plus code: FR2X+8F Bremen, Indiana, United States

Products:

Pro Shocks

 

Since 1986 Suspension Spring Specialist, Inc. has been designing and manufacturing coil springs for the automotive racing industry. We have one of the largest selections of heights and rates of springs available, and a large inventory of springs for fast, same day shipment, as well as various size of pro shocks and assorted accesories you may need.

There’s no finer guarantee in the spring industry than the one you receive from Suspension Spring Specialist, Inc. If any spring is found to be defective in material or workmanship, it will be replaced at no cost to the purchaser. Just contact Suspension Spring Specialist, Inc. or your nearest dealer for replacement.

 

2.  Shock Surplus USA

Address: 12711 Ramona Blvd UNIT 106, Irwindale, CA 91706, United States

Tel: +12134333616

Plus code: 32H4+H4 Irwindale, California, United States

Products:

Shocks absorbor

 

3. Bilstein Shock Absorbers USA

Address: 14102 Stowe Dr, Poway, CA 92064, United States

Tel:+18583865900

Plus code: WXPC+WJ Poway, California, United States

Products:

pro Shocks absorbor

 

In 1954, BILSTEIN revolutionized the damping technology and has always be recognized for its top quality and high performance as innovative systems partner for the automobile industry.

When August Bilstein laid the foundations for the innovation incubator BILSTEIN in Altenvoerde in Germany’s Westphalia region in 1873, nobody had any idea of the crucial influence the company’s products would one day have on the driving comfort and safety of cars.

 

4. Vod Varka Springs USA

Address: 1251 US-30, Clinton, PA 15026, United States

Tel:+17246953268

Plus code:FPQ4+68 Clinton, Pennsylvania, United States

Products:

Springs and wire

Shocks

 

We are a small family owned company in the rural hills of western Pennsylvania and have been in operation since 1978.  Our quality and experience are derived from years of practical experience in the industry. From coiling of flat wire springs to manufacturing wire forms with numerous bends and soldering operations, we can manufacture your parts. Of our customers one includes the Department of Defense which we have the highest quality rating attainable by them.

 

5. Enertrols Inc USA

Address: 23435 Industrial Park Dr, Farmington Hills, MI 48335, United States

Tel: +17345954500

Plus code:FH6J+PJ Farmington Hills, Michigan, United States

Products:

Ace Controls, founded in 1963, introduced the first adjustable industrial shock absorber. Over 50 years later, ACE is the internationally recognized expert in the field of industrial damping technology. The company’s portfolio now includes automation control, motion control, vibration control and safety products.

ACE’s experienced, local support team is focused on finding the right solution for each customer – worldwide. The company’s products are everywhere, from the bottom of the ocean to the sky above, and anywhere an accurate deceleration or force support or vibration control is needed. ACE is headquartered in Farmington Hills, Michigan (Engineering and Operations) and in Langenfeld, Germany (Marketing and Sales), with 5 branches and 4 production facilities worldwide as well as representative offices in 45 countries on all continents.

 

6.  PRO SHOCKS, Inc. USA

Address: 977 Hyrock Blvd, Boonville, IN 47601, United States

Tel:+18556824404

Plus code: 2MWJ+RQ Boonville, Indiana, United States

Products:

4-WAY ADJUSTABLE SHOCKS

DOUBLE ADJUSTABLE SHOCKS

NON-ADJUSTABLE SHOCKS

The PRO Shocks reputation for building winning racing and performance shocks begins with the company’s comprehensive knowledge of chassis dynamics. The proven performance that makes PRO Shocks suspension systems famous for quality comes from a precision manufacturing environment that holds the most stringent tolerances during assembly and through to the dyno process. PRO Shocks has maintained this quality for over 30 years because the company attracts race-oriented professionals who come to the job with as much passion as our customers bring to their cars.

 

7.  Koni North America USA

Address: 1961 International Way #9526, Hebron, KY 41048, United States

Tel: +18595864100

Plus code: 37MW+RC Hebron, Kentucky, United States

Products:

Multi Pro Shocks

KONI is the premier manufacturer of adjustable shocks in the world. Our shocks are made from the highest quality raw materials and machined to the highest tolerances. This quality allows KONI North America to offer a limited lifetime warranty on our shocks.

 

8. Ikon Suspension USA

Tel: +18145927003

Products:

DOUBLE ADJUSTABLE SHOCKS

Industrial Shock Absorbers

The opening chapter of the IKON story begins at the turn of the new Millennium. Proven Products Pty. of Australia, Koni’s right-hand full service antipodean distributor for their automotive range since 1962, acquired the sole global rights to manufacture the venerable Koni motorcycle series of shock absorbers when their production ceased in Holland. While the ink on the agreement was still wet, select tooling from the Koni factory was in the hold of a cargo ship en route to Australia. In a matter of a few short months, with some 21st century updates, the 7610 Series was again back in full production, forming the bedrock of Proven Product’s new IKON brand.

Interestingly, the first IKON suspension unit’s heritage stretches all the way back to the small Dutch town of  Oud-Beijerland, thousands of miles from IKON’s North Albury facility in New South Wales, Australia. It was here in the Netherlands over 50 years ago, where Koni, a shock absorber manufacturer par excellence, first designed and manufactured what was to become one of the motorcycling world’s most iconic suspension units.

In 1967, the British motorcycle industry was at its zenith and in the USA, Super Bowl I played out between the Packers and the Chiefs (the Packers won 35-10). This was also the year Koni  introduced their game changing 76 Series motorcycle shock absorbers. Direct replacement for the stock lack-luster suspension fitted by most motorcycle manufacturers, the 76 Series instantly gained worldwide fame as suspension of choice for tens of thousands of discerning competition and street riders.

 

9. Ohlins USA

Address: 703 S Grove St, Hendersonville, NC 28792, United States

Tel:+18286924525

Plus code: 8G5X+GH Hendersonville, North Carolina, United States

 

Our passion for innovations and state-of-the-art technology motivates us to search for the next generation of advanced suspension technology.

Our dedicated and professional staff collaborate with some of the most prestigious manufacturers and teams in the world to develop the optimal suspension performance. The consequential knowledge contributes to creating the pinnacle of suspension for aftermarket and OEM vehicles.

Öhlins aftermarket customers ride on factory racing technology with just small or even no modifications. Our goal is to offer the same level of service and support throughout our organization, no matter if it is a racing team or a passionate enthusiast rider or driver in search of a better functioning suspension unit for their motorcycle, car or mountain bike.

Remaining in the forefront of advanced suspension technology makes us work even harder to find the next chapter of suspension technology.

 

10. Progressive Suspension Inc USA

Address: 6911 Marlin Cir, La Palma, CA 90623, United States

Tel: +17145238700

Plus code: VX58+VF La Palma, California, United States

Products:

  • 970 Series Piggyback Reservoir Shocks
  • 429 Series Softail Shock
  • 512 Series Shocks

 

Founded in 1982, Progressive Suspension has evolved into the largest aftermarket motorcycle suspension manufacturer in the United States as well as a top tier supplier of suspension components to domestic OE customers. Our suspension systems can be found on premier customs, production trikes and just about any bike that’s doing big miles across the US and for that matter the world.

A team of ride control trained engineers use state of the art computers, shock dynos and real world testing to create the ideal suspension platform for your bike. From there, our state of the art manufacturing facility assembles and in many cases dyno tests each unit before it leaves the factory. Our quality control systems touch on each component from assembly to final stages and nothing gets in or out of the building without passing a rigorous inspection.

High performance suspension is not limited to street machines, as our line up also includes an in depth line of shocks and fork springs for bikes dating back to the 50’s as well as product for modern Adventure Touring bikes, Sport Bikes, ATV and UTV’s.